Homepage

Browse by pages:Used Car Parts by Pages (554)

Enter your search terms Submit search form

18 8.5 BMW Rim and Snow Tire 245/40/18 E46 E36 3 series (Used Car Part)

Location:

Year:Jan-21 17:10

Price:$0.99

Source Site:Ebay Used Cars

Detail Information:Find more detail information and contact with the seller (if available).

The Related Used Car Parts:

19" Mercedes Benz C CL CLK E ML S SL R AMG wheels rims (Used Car Part)

Year:Jan-21 17:08 Price:$0.99 Location:

EuroTech Luxury Wheels VisitmyeBayStore:els WheelstofitBMW | MercedesWheels Search my eBay Store: Add to Favorite Stores Set of Four (4) New Black 19 Mercedes-Benz Wheels Audi BMW Cadillac Jaguar Land Rover Mercedes-Benz Porsche Set of Four (4) Brand new Black 19 Mercedes-Benz Wheels - Center Caps Included! Specifications: Size: Staggered 19*8.5 x 19*9.5 Bolt Pattern: 5x112 Finish: Black Offset: Many offsets available to fit any vehicle Tires: Tire packages available - Call for details Fitment These wheels will fit the following vehicles: C CL CLK E ML R GL S SL SLK (All Years) Fitment and satisfaction guaranteed! Call us anytime at 858.245.1802 Shipping: Shipping is free to anywhere in the Continental US. All wheels are shipped same day via UPS Insured Delivery. Please allow 3-5 business days for arrival of your new wheels. Click on images below to enlarge. EuroTech Luxury Wheels Guarantee: All EuroTech Wheels are backed with a Lifetime Structural Warranty for peace of mind on the road. We also include an industry-leading two year warranty to protect the finish of your wheels. With basic care, your new wheels will last a lifetime, guaranteed. Quality: EuroTech wheels meet or exceed every industry standard, including TUV, DOT, ISO, VIA and JWL. In addition to quality certification, each EuroTech Wheel endures 15 rigorous inspections prior to leaving the factory. Quality control procedures include: underwater crack testing, radial fatigue tire testing, xray evaluation, impact load testing and weight bearing analysis, to name a few. Every EuroTech Wheel is manufactured to the same high quality standards as factory original (OEM) wheels. Our dedication to quality produces the most safe and reliable wheels in the world, but dont take our word for it - look at our Feedback and see what thousands of happy customers have to say. Selection: We stock every item we sell. This means no drop shipping, no product delays and no cancelled orders. Youll find exactly what youve been looking for here and youll get it fast! We stock the largest variety of aftermarket wheels in the nation, with every size, style and finish imaginable. Experience: EuroTech Wheels has over 100 years of combined experience in the automotive industry. Our professional staff is on call 24/7 to help guide you through every step of upgrading your vehicle. We are proud to employ a wide-array of auto enthusiasts, mechanical engineers, certified master mechanics and Award-Winning sales managers to address your most demanding concerns. Fitment and satisfaction guaranteed. Call us anytime at 858.245.1802!

The Related Used Car Part:

SBC CHEVY 383 STROKER 400 406 BOWTIE BLOCK IN CRATE (Used Car Part)

Year:Jan-21 17:02 Price:$895.00 Location:Kingsport, Tennessee, United States

Part Brand: GM BOWTIE BLOCK Placement on Vehicle: -- Manufacturer Part Number: 10051183 Surface Finish: BARE CAST IRON AAIA Part Number: -- Warranty: Yes Other Part Number: 10051183 Condition: New Description VisitmyeBayStore: Add to Favorite Stores | Sign up for Store newsletter SBC CHEVY BOWTIE BLOCK, BRAND NEW FACTORY SEALED IN THE CRATE This is the perfect block to build your 350,383,396,400, or 406 engine for street or strip use. A factory oem stockstyle block pales in comparison to the Bowtie block. The high block superior in every way possible. These blocks are rough-bored to 3.98, and can easily be bored upto 4.155, and this still allows room for cylinder cleanup of 30 thous if ever needed. When bored to up to4.155 the cylinder walls are still approx. 2.50 thick. Theyhave a thicker deck than standard GM blocks. This block is fully adaptablefor replacement of an oem stock block.These have the one pc. rear main seal design, and is a very desirable upgrade from thetwo pc. rear main sealblock.Part number for this block is 10051183 GM rates the bore max very conservatively. We are 100% confident that the bore diameter on these blocks can be taken to 4.155 without an issue, and still have comfortable room for cleanup should you ever need. This block would be perfect for those wanting to build a 383, 400 or 406to an extreme durability or racelevel. Overheating issues common with many stoker buildups, especially the original 400 engines and are very unlikely tobe encountered with the Bowtie block. Every possible inherent weakness that the standard GM blocks have,has beenaddressed in the design of the Bowtie block. These blocks accept crankshaftsthat havea 2.45" mains This is the standard 350 engine main size.A very sound investment for those wanting to build the perfect engine. Continue reading! We are selling these blocks at a cost far below retail, about one third of what you would see them listed for at suppliers such as GM,Summit or Jegs. These blocks are brand new, factory sealed in the original crate straight from theGM Performance Division. We have obtained a limited supply of them. Rest assured there is nothing whatsoever wrong with these blocks. They are exactly as they should be, perfect in every way.We have already shipped several of theseto customers and many machine shops are buying them. This updated design has a decidedly different appearance, but retains its original part number. New tooling procedures have significantly improved the quality and durability of this third-generation casting. This heavy-duty cast iron Bow Tie block has rough-bored 3.98" diameter cylinders. This block is recommended for maximum effort competition engines, as well as street/strip buildups. The deck surfaces arethicker than production blocks, and the head bolt holes are blind tapped to improve head gasket sealing, and allow a very thick amount of metal to remain near the deck, and cylinder bores. The main bearing bulkheads are .900" thick and the front and rear bulkheads are reinforced with strengthening ribs.The bulkhead areas, are considered the complete face of the front and back of the block. Regular oem style blocks are very thin in this area, and are prone to flexing or crackingunder load. The extra thick bulkhead areas in these blocks are what makes these blocks extremely durable in our opinion, as this was a weak area on standard oem GM blocks. These blocks all have the classic Bowtie logoembossed by GMon the side of the block. This block is perfect for those that already have a 383 rotating assembly, especially a forged setup, but need a block. This would make a very strong build, regardless of what level your taking the engine to. We are also offering fully forged rotating assemblies for 383 and 400 cid buildups. We have the best price on these, and the best combination of parts. See our other listings. The updated design on this Bow Tie block’s oil galleries now extend flush to the front and rear faces of the cylinder case. The revised Bow Tie block has a boss below the bell housing flange behind the #8 cylinder that can be drilled and tapped for lifter valley oil scavenging. The outer water jacket walls have bosses to allow coolant passages to be drilled between adjacent "siamesed" cylinders. Oil drain back holes in the lifter valley are drilled. The updated design provides more consistency in the thickness of the cylinder walls and water jackets. The "siamesed" cylinder bores have a nominal wall thickness of .340" at the casting parting line (measured 2" below the deck surface), but notice in the picture below that the thickness at the top of the cylinders is over half an inch thick. The blind tappedhead bolt holesallow this area to be very thick around the upper region of the cylinder wall. We are also told that the material these blocks are made of is much stronger than the oem standard block. Our machinist more or less verified this when honing and boring our test model. Notice the cam circle are in the front of the block. No signs of offset as is usually the case in most oem stock blocks. When racers use an oem stock block, this is an area they are concerned about, as uneven cam circles are evidence of core shift in the block, and most oem GM blocks haveconsiderable amounts ofcoreshift in them.These blocks will not accept oem stock roller lifters. They will accept hyd. flat tappet lifters, or retro fit hyd. roller or solid lifters. The retro fit lifters are always superior in quality to the oem style. We offer them in our other listings. Technical Notes: Oil dipstick hole is not drilled and the lifter holes are bored to production diameter .842". 2-bolt main bearing caps are installed to simplify the installation of the heavy-duty steel main caps with splayed outer bolts.We do offer this block fullymachined with or without splayed caps in our other listings.Bow Tie blocks are designed for standard, (350 mains)stylecrankshafts with 2.45" diameter main bearing journals. The Bow Tie casting block P/N10051183 is machined for a one-piece rear main bearing seal used on 1986 and later production small- block Chevrolet V8s. Crankshafts designed for two-piece rear main seals can be installed in Bow Tie blocks using crankshaft seal adapter P/N10051118. These blocks weigh 187 lbs. Yes you can use the seal adaptor to convert this block to accept a two pc. rear main seal crankshaft. Worry not about the fact that these blocks are two bolt main, as the extra thick front and rear bulkheads on these blocks more than compensates for the lack of four bolt main caps in our opinion. The only instance that we can see that a splayed four bolt main would be needed, is for avery high level race engine, that turns above 7500 rpm. We do offer the splayed cap fully machined version of this block in our other listings.The average street/strip engine would never come close to needinga four boltmain cap setup due to the fact this block has so many other strength factors over an oem block. The caps are also made from high strength nodular iron. The block material is also much stronger than oem style blocks. Our machinist made note of this when machining the cylinder walls on our company presidents 400cid engine. Just as all high performance blocks, these do require machine work before assembly. Nothing out of the ordinary. We offer this block fully machined ready for assembly, see our other listings.These are one pc. rear main seal design, and this we find to be superior to the early two pc. design. The nice thing about the one pc. rear main seal blocks, is that they are 100% compatible to the early two pc. style. They are able to live in the same place a two pc. once did. All mounting locations are the same. All acc. holes are for timing covers, etc. are in the same location. We know this to be a fact, as we sell the L31 short block engine, and it isa one pc. rear main seal design. One pc. rear main seal blocks are very resistant to leaking. The early two pc. rear main seal blocks are notorious for oil leaks. Feel free to email us if you have any s concerning application, or give us a call at ask for Travis, Charlie or Dave As mentioned above, the bulkhead are is nearly one full inch thick. OEM stock blocks are a fraction of this. Pictured below is the what is considered the bulk head. You place your fingers on the front and backside of this area and feel the incredible difference from a stock block. This is the same on the back side of the block. When an engine is under load, the block tends to flex, and this virtually eliminates this. Those running a blower will find this block a must, as the thicker bulkhead in the front is very resistant to cracking. Our company founder, Fred White is very familiar with the high performance Bowtie blocks made by GM. He has built hundreds of high s over the years using this type block.It is his opinion that this type block would last a lifetime if built to moderate levels and ran in a street rod. He claims the Bowtie blocks have addressed every issue that a standard block could encounter. This block will accept any part such as crankshaft, heads, oil pan, that a standard GM 350/383 block will. Those wanting to build a 383 stroker engine will be pleased to know that the blocks are fully clearanced for a .3750 stroke crankshaft, andit may be possible tofurther clearance them to accept a 3.875 or4.00 stoke crank.If you already have a such a rotating assembly then you will not have a problem with clearancing. If you dont have a rotating assembly yet, then we suggest you take the engine bore up to 4.125 and build a 400cid engine, as they are superior to the 383 in our opinion. The only reason this cant be done with regular 350engines, is that the cylinder walls will not allow you to bore them anywhere close to 4.125. Boring to 4.125 or even 4.155is not an issue with our Bowtie block. When using a 383,(3.750 stroke)stroker crank, and boring to 4.125=400 cubic inches or taking the bore to 4.155 bore will give you a 406. If you already have a 383 rotating assembly, and want to usethis block, then you would bore it to 4.030, and you then have a 383We are in the process of dynoing our 400 engine built with one of these blocks. If all goes well, we will be marketing that engine package, as well as the rotating assemblies for those wanting to build their own. Update on our400ciddyno results as of 10/25/08 We have completed our dyno testing on the 400cid engine using the Bowtie block, and our new fully cncd 220 heads, witha Howards 565/575 lift hydr. rollercam. This absolutly perfect combination made 515hp at 6100rpm with 500 pound feet of torque at 5000rpm. We were certainly not worried in the least about the Bowtie block, as our goal was to test out our new fully cncd heads and cam package. Every item we mounted on this block went on without any issues whatsoever. 535hp is far below this blocks handling capability. We are confident this block could easily handle 800hp or more. If you dont decide to use this block for your engine buildup, the only other alternative is using an oem GM block, and they are not even close in design, or durability compared to the GM Bowtie blocks. The 400/406 buildupsare truly amazing in the way they perform. This is the perfect opportunity to have one, and ata price lower than you will ever find. This block is the best insurance you can have when building a street/strip engine that you want to last. It is not uncommon to see these blocks being used on engines with ratings in the 1000hp range. Imagine the durability you would have in an average street rod built to much lower hp levels. For the price we are offering these blocks for it certainly makes good sense to build your next engine with this block. The resale factor of your vehiclewould be increased dramatically with just the mention that you built your engine with a brand new Bowtie block. Bragging rights are well established. In the picture below you can clearly see the half moon notches in the block to clear the head of the connecting rodcap screw . The opposite side of the cylinder is also clearenced, as this is the part of the block that usually interferes with the threaded end of the rod bolt. This clearancing is done by GM and normally cost around $125.00 at most machine shops. Another area that is clearanced are the pan rails, but notice in the picture below where we have pointed out. This may interfere slightly with some crankshafts. This spot can be ground to clear in less then five minutes with a hand held dremel tool. Most lightweight crankshafts will not interfere in this area at all. We have found that the Eagle H-beam rods clear these blocks. Be sure not to use rods from companies that are not sure if they are stroker clearanced. We do know that Eagle and Scat rods will clear this block when using a 3.750 stroke crank. We have a very limited amount of these. Feel free to email us with your questions. We can answer anything you want to know about these blocks. These blocks will need to be machined, just as any of the high performance blocks on the market. We do offer a fully machined version in our other listings. The machined version offered in our other listingswill be bored to desired specs, TORQUE PLATE HONED,(torque plate honing is veryimportant)lifter bores finish honed, mains will be line honed, as this creates a perfect balance between each main, oil dipstick hole will be drilled, and notched to accommodate billet style dipsticks, blocks will be completely cleaned, and oiled. The pan rail area mentioned above will also be notched, as some crankshafts cause need for this. This machine work willbe performed in house by some of what we consider the bestengine builders known. Noless than 15 years experience,not to mentionusing state of the art equipment.See our other listings for the fully machined version. This auction does not include the above mentioned machine work. We will be adding more valuable info to this add in the next few days, so keep it one your watch list. All standard partsthat are used on oem stock blocks will fit on this engine. Such parts as timing chain and cover, oil pump, heads, etc, all fit perfectly well on this block. We have been asked many times about this. We have yet to run into one part fitment issue that a stock part did not fiton this type block. We also offer this block fully machined and ready for assembly. See our other listings for the fully machined version of this block.A splayed cap fully machined version is also offered in our other listings. Email us for shipping cost. We have excellent sources for low cost shipping anywhere in the USA, Canada as well as overseas. Those in the 48 State USAmust email us for shipping rates. If this block is delivered to a commercial address, andnot needing a lift gate service, will receive a very low shipping price.Shipping to a residential and requiring a lift gate service can expecta much higher shipping rate. The block only weighs 200lbs. and comes in a smallcrate. Two or three average guys should be able to unload this by hand wewould think. Just to give our customers an idea of what this block may cost to ship, we listed the shipping cost to8 popular major cities in the US to be delivered to a commercial address, and not needing a lift gate service. This will more of less give you a rough idea of what it may cost you. Most of our customers have been surprised at how low the shipping cost is for this block. Below are the sample rates, These prices are for COMMERCIAL delivery, with NO lift gate service. Your block will be fully insured. Delivery time is surprisingly fast. Usually within 1-5 days. We are located in the eastern part of TN. West coast shippments will usually take 4-5 days, but most all other zones are considerably faster. These shipping rates are subject to vary depending on fuel prices. Walk-ins or personal carriers are welcome. You must pay 9.5%sales tax if your block is delivered to an address in the state of Tennessee unless you have an automotive related tax exemption certificate for resale. Dallas, TX 75235 - The price is $121 Seattle, WA 98113- The price is $154 Los Angeles, CA 90005- The price is $146 Melbourne, FL 32934- The price is $121 Chicago, IL 60605- The price is $133 Phoenix, AZ 85020- The price is $139 Wichita, KS 67210- The price is $134 Newark, NJ 07114- The price is $137 Sioux City, IA 51101- The price is $134 Detroit, MI 48210- The price is $134 Denver, CO 80203- The price is $134 Mooresville, NC 28117- The price is $121 These pricesare just for these particular zip codes, because most of these cities have several different zip codes and the price may vary.We did check other zip codes inthe cities above and the prices did not seem tochange. The blocks are in absolutely brand new condition, factory sealed in their original crate. Many have asked us if there is any thing wrong with these blocks, and the answer is NOTHING IS WRONG WITH THEM! We obtained these directly from GM, as part of a warehouse shutdown. We have very little profit built in to this price. Our hopes are to sell our fullymachined version, or better yet, the fully built 400cid engines we are in the process of building. Several machine shops have purchased these from us, some buying up to three at a time from us. Do not forget to install the NOTE FROM OUR COMPANY PRESIDENT, SKIP WHITE When building ahigh performance383 engine from a 350 block as is common practice, you are no doubt putting tremendous strain on the block, not to mention the 30 over boring that compromises the cylinder walls. They tend to run hotter than normal, and have a shorter life than a stock 350. 40 or 60 over make the situation worse.The Bowtie block we are offering, is truly the way to go. The initial cost may be slightly higher, but you will not have any of the common issues associated with the 383. If your starting fresh and dont yet have a rotating assembly, then this would also be the perfect opportunity to move up to the much desired 400cid engine. The 400 operates much better than a 383, as its bore to stroke ratio is what we consider the perfect combination for a street rod. The only reason you dont see many people running the 400 is that the blocks are very rare, and their reliability is questionable, but they do make are very good street/strip engine. The Bowtie block is the way to go. Paying nearly $2000.00 for one makes it costly, but you now have thechance to buy one formuch less.We are building about 10 400cid engines with them now, and willbuilda fewto very highperformance levels. This has to be the best deal we have ever offered, andis this is not just saleshype. Wefeel very fortunate to have cameacross these. When you go to the car shows, everyone seems to have about the same lazy soundingso called hot rod engine. You cant imagine how much more exciting it is to not only have atrue street rod engine in your car, but the sound they produce speaks to all upon startup. The engine is so much a part of owning a hot rod, feeling the power, as well as hearing it, and being heard by the masses. Thats what its all about. I dont care much about having A/C or a big sound system, dont really care about tons of chrome, as none of those things can compare to pure muscle power soundunder the hood. A wild sounding engine overwhelms spectators more than anything else about a car. Buy one of these blocks and build a wicked sounding, highperformance engine. Now all you need isa set of our up and coming fully cncd 220 runner heads, with flow numbers to die for, and at about half the cost of most others. Skip White WE OFFER GREAT DISCOUNTS ON SHIPPING. YOU PAY THE FULL SHIPPING FEEON THE HIGHEST SHIPPING COST OF YOUR GROUP OF ITEMS, AND HALF PRICE SHIPPING ON ALL ADDITIONAL ITEMS. FEW OFFER DISCOUNTS ON SHIPPING SUCH AS THIS.EMAIL US USING THE ASK SELLER A QUESTION TAB,IF YOU WOULD LIKE US TO CALCULATE YOUR SHIPPING COST ON MULTIPLE ITEM ORDERS. IF YOU ARE UNABLE TO EMAIL US GIVE US A CALL AT FROM 8AM-6PM EASTERN TIME MON-FRI AND 11AM-3PM ON SAT.WE WILL ANSWER YOUR EMAILWITHIN THE SAME DAY IN MOST CASES,SO KEEP SHOPPING AND PAY HALF PRICE SHIPPING ON ALL ADDITIONAL ITEMS. PLEASE CALCULATE YOUR SHIPPING CORRECTLY, TO AVOID DELAYS IN SHIPPING YOUR ITEMS. IF YOU ARE HAVING DIFFICULTY PAYING WITH PAYPAL, FEEL FREE TO GIVE US A CALLAT ASK FOR SARA OR AMANDA.CUSTOMER SERVICE AND SALESHOURS OF OPERATION ARE 8AM-6PMMon-Friand10AM-3PM SAT. FOR TECH SUPPORT, PLEASE USE THE, "ASK SELLER A QUESTION TAB". ITS LOCATED AT THE TOP RIGHT HAND SIDE OF THIS PAGE. YOU MAY ALSO CALL FOR TECH SUPPORT IF YOUR UNABLE TO EXPLAIN WHAT YOU NEED IN AN EMAIL. TECH SUPPORT IS USUALLY NOT AVAILABLE TILL AROUND 11-6 MON-FRI. Email us with your zip code to obtain a shipping rate on this block. Most of our items have a flat rate shipping. Due to the heavy weight of this block, we are unable list a flat rate. Shipping rates for this block vary, depending on where you are located, but they are usually much less than you may think. For an instant shippingquote, give Sara a call at Pay withyour credit card through PayPal, or call us at or Weacceptmost major credit cards. =0) { var p=new Array(); p[0]=document.links[i].protocol; p[1]=document.links[i].hostname; p[2]=document.links[i].pathname; for (j=0;j<(p.length);j++) { while (p[j].charAt(0)==/) { p[j]=p[j].slice(1); } while (p[j].charAt(p[j].length - 1)==/) { p[j]=p[j].slice(0,-1); } } document.links[i].href=(p[0]+"//"+p[1]+"/"+p[2]+"&jitem_id="+f14+"&jmagic=1"); break; } } } else { c1=c2=c3=c4=c5=c6=0; for(i=0;i=0) {c1++;} else if (((document.links[i].search)).indexOf("BetterSeller")>=0) {c2++;} else if ((((document.links[i].search)).indexOf("ow")>=0)||(((document.links[i].search)).indexOf("tosShow")>=0)) {c3++;} else if ((((document.links[i].hash)).indexOf("ow")>=0)||(((document.links[i].hash)).indexOf("tosShow")>=0)) {c4++;} else if (((document.links[i].search)).indexOf("relistid")>=0) {c6++;} } } if (window.itemState) { if (itemState.toLowerCase()=="state2") {c5++;} } if((c1>=1)||(c2>0)||(c3>0)||(c4>0)||((c1>0)&&(c5>0)&&(c6==0))){dw(3);}else{dw(2);} f11="xclick-auction"; f13="iid="; f14=""; for (i=0;i<(document.links.length);i++) { if (document.links[i].search.indexOf(f13)>0) { s11=document.links[i].search; j=s11.indexOf(f13); if (j>0) { s11=s11.slice((j+(f13.length))); for(k=0;k<(s11.length);k++) { if (isNaN(s11.charAt(k))) { j=k; break; } } s11=s11.slice(0,j); f14=s11; break; } } } for (i=0;i<(document.links.length);i++) { if ((document.links[i].pathname.indexOf(f11))>=0) { var p=new Array(); p[0]=document.links[i].protocol; p[1]=document.links[i].hostname; p[2]=document.links[i].pathname; for (j=0;j<(p.length);j++) { while (p[j].charAt(0)==/) { p[j]=p[j].slice(1); } while (p[j].charAt(p[j].length - 1)==/) { p[j]=p[j].slice(0,-1); } } document.links[i].href=(p[0]+"//"+p[1]+"/"+p[2]+"&jitem_id="+f14+"&jmagic=1"); break; } } } Select a picture 00005

Tip: We only provide some information for users, and these Used Car Parts may not be available. If you want to read the detail information, please click the Detail Information Link.

This Part is 18 8.5 BMW Rim and Snow Tire 245/40/18 E46 E36 3 series (Used Car Part)

---

---

---

---

---

---

---

---

---

---

Copyright © 2009 Used Auto Parts 2009 Information, All rights reserved   Disclaimer